Загрузил someRest

L05 Model lib Mgmt v11

реклама
Lecture 5 – Models and Library
Management
Simplorer v11
14.5 Release
© 2013 ANSYS, Inc.
1
Simplorer v11
Agenda (Advance Class)
8:30 – 9:00
Lecture 5 – Models and Library Management
9:00 – 10:00
Workshop 10 – Models and Library Management
Break
10:15 – 10:45
Lecture 6 – Viewing and Post Processing Results w FFT
10:45 – 12:30
Workshop 11 – Viewing and Post Processing Results w FFT
12:30 – 1:30
Lunch
1:30 – 2:00
Lecture 7 – Parametric Sweep and Statistical Analysis
2:00 – 2:45
Workshop 12 – Parametric Sweep
2:45 – 3:00
Workshop 13 – Statistical Analysis
Break
3:15 – 3:45
Lecture – Optional Advance Labs
(L08 - 3phaseInverter_IGBTs)
3:45 – 5:00
Workshop – Optional Advance Labs
(WS14 - 3phaseInverter_IGBTs)
© 2013 ANSYS, Inc.
2
Simplorer v11
Welcome!
Welcome to the ANSYS Simplorer application Advance training course!
This training section covers some Advance topics of using ANSYS Simplorer
in performing electrical systems analyses.
It is intended for those that have taken the introduction class, or have Simplorer
experience
Course Objectives:
–
–
–
–
–
Understanding the different aspects of Models and Library Management
Viewing and Post Processing of simulation results, using probes, and FFT Analysis
Parametric Sweep Analysis
Statistical Analysis
Optional subjects
• IGBT Characterization
© 2013 ANSYS, Inc.
3
Simplorer v11
Models and Library Management
© 2013 ANSYS, Inc.
4
Simplorer v11
Library Concepts
Library items that are placed on a schematic have several “Definitions”
associated with them
•
•
•
– These are placed in Definitions folders in the Project Manager window.
“Model” definition represents the characteristic equations of the item
“Symbol” definition defines the symbol attributes
“Components” definition is a wrapper that ties all the definitions together
© 2013 ANSYS, Inc.
5
Simplorer v11
Library Concepts cont’d
When an item is exported to a library, each definition gets placed in its
associated library
– *.aclb – component library, *.aslb – symbol library, *.asmd – model library
Once an item is placed on the schematic, all the definitions transfers
from the library to the project file as “local” definitions
– located in the project manager window
Definitions are not edited in the library, but in the project. If the edits
are to be reflected back to the library definitions, user must “export” the
edited definitions to the library
© 2013 ANSYS, Inc.
6
Simplorer v11
Library Concepts cont’d
Note if an item is removed from the schematic, its definitions will still
remain in the project definitions folders.
To clean up unused definitions, use menu (Project -> Remove Unused
Definitions), select all, Apply, and repeat until none are left.
© 2013 ANSYS, Inc.
7
Simplorer v11
Library Concepts cont’d
Note because local definitions are used first, if a user is given updated
library files with new definitions, need to update the local definitions to
reflect the newer ones from the new library using the menu (Tools ->
Update Definitions).
© 2013 ANSYS, Inc.
8
Simplorer v11
Library Directories
The stock library files that ship with Simplorer v11 are stored under the
directory …/Simplorer11.0/windows/syslib. These libraries are intended
to be read-only
In addition to the system libraries, Simplorer recognizes two userconfigurable libraries, the “userlib”, and “PersonalLib”.
– Userlib is usually created to be shared within a company
– PersonalLib is usually created to be used only by the individual user
© 2013 ANSYS, Inc.
9
Simplorer v11
Specifying Location of Library Directories
The library file locations can be edited using
the menu (Tools -> Options -> General
Options), then select the “Project Options”
© 2013 ANSYS, Inc.
10
Simplorer v11
Library Search Order
Note the search order for the definitions are
1) Project definitions (Local definitions)
2) PersonalLib
3) UserLib
4) Syslib
© 2013 ANSYS, Inc.
11
Simplorer v11
Configuring Libraries
If user is given library files (*.aclb – component library, *.aslb – symbol
library, *.asmd – model library), in order to use these libraries in a
project, they need to be “Configured”
• Use the menu (Tools -> Configure Libraries).
•
– Note each definition library needs to be configured
Use the >> button to add a selected library to the “Configured Libraries”
column.
– The icon for the newly configured library turns green.
Note select “Save as default” if desire to have these libraries show up
each time Simplorer is invoked
© 2013 ANSYS, Inc.
12
Simplorer v11
Translating legacy libraries (pre v8)
Libraries created in simplorer v7 (*.smd files) were in different formats
and need to be translated to be used in newer versions of Simplorer.
– The process is to simply use File -> open, or drag and drop the *.smd file
into the project manager window.
Note the same process can be done to convert v7 designs (*.ssh files)
© 2013 ANSYS, Inc.
13
Simplorer v11
Model Import
Note there are several types of Models that can be imported directly into
simplorer using menu (Tools -> Import Simulation Models)
•
•
•
•
– custom symbols can then be created, and these models could then be
exported into user or personal libraries
VHDL-AMS
SPICE
SML (Simplorer Model Language)
C code models
In addition, models can be imported from other ANSYS tools
© 2013 ANSYS, Inc.
14
Simplorer v11
WS10 Lab Overview Flow
In this lab, a new project and design in Simplorer is created
create a path for a personal library
import existing simplorer libraries to this personal library folder
“configure” this new library to be used in the design
import a VHDL-AMS and Spice model, view them in their respective
model editors, create symbols
“export” these models to the previously imported library that now exist
in the personal library
Create a circuit with these components
and simulate.
© 2013 ANSYS, Inc.
15
Simplorer v11
WS10 Lab Demo
Open new Simplorer
Observe how to create a path for a personal library
copy existing simplorer “legacy” libraries to this personal library folder
“configure” this new library to be used in the design
import the irf520n MOSFET Spice model, view in model editor, create
symbol based on existing MOSFET symbol from Simplorer’s library
“export” the spice model to a new personal library
Clean up the project definitions (Project -> Remove Unused Def…)
© 2013 ANSYS, Inc.
16
Simplorer v11
Скачать