PROGRAMMING TFT70X Before you start - Download the file FW_TFT7_1_1_14.zip the email instructions and extract the file. - Download the file win32diskimager-v0.7-binary.zip from the following link: http://vegalift.it/documents/TFT-7/Software/win32disk.zip and extract the file. - Take a new MicroSD 4/8 GB Programming TFT 1 – Connect the MicroSD reader to your computer 2 – Format the MicroSD with FILE SYSTEM "FAT32" 3 – Run the software “ Win32DiskImager.exe“ (The first opening may take a few minutes) 4 – Click on the button 5 – Select the file “operating_system.img” 6 – Select the unit of the MicroSD reader 7 – Click on the button “WRITE” 8 – Wait until the writing is finished without doing any other operations. 9 – Click on the button “EXIT” 9 – Insert the microSD on the display
